Your drone in OBRIY: UAV integration and SITL for developers

Go back

Developing a new UAV involves more than designing the platform and improving its technical specifications. It also requires software validation, testing of control systems, and operator training. Many of these tasks can be carried out in a virtual environment before conducting actual flight tests.

OBRIY enables UAV manufacturers to integrate their own aircraft into the simulator, test software and hardware, and train operators using virtual models of their platforms. Manufacturers can also connect their own ground control stations to the simulator, replacing the physical UAV with its virtual counterpart while retaining the familiar interface and control logic.

For training, engineering, and R&D purposes, OBRIY offers the OBRIY + SITL (Software-in-the-Loop) configuration, which enables the integration of actual flight controller firmware, ground control stations, and onboard computing systems into the simulation environment.

This allows OBRIY to support both operator training using real ground control stations and engineering testing, algorithm validation, and the development and refinement of new solutions.

Your UAV in OBRIY's Virtual Environment

Integrating a UAV into OBRIY allows manufacturers to replicate its flight characteristics, control behaviour, and operational scenarios in a virtual environment.

For manufacturers, this provides an opportunity to incorporate the simulator into their own training programmes, enabling operators to familiarise themselves with the specific characteristics of a UAV platform and develop their piloting skills before their first real flight.

The simulator recreates real-world terrain using satellite imagery, including detailed topography, urban environments, weather conditions, and different times of day. Training scenarios can also simulate electronic warfare (EW) interference, GPS signal loss, video feed degradation, and communication limitations.

Depending on the UAV's intended purpose, operators can plan flight routes and practise reconnaissance and strike missions, aerial target interception, infrastructure protection, and coordination between crews.

Beyond individual training, OBRIY supports network integration with other military simulators through the Distributed Interactive Simulation (DIS) protocol. This enables UAV operators to participate in complex, integrated training scenarios involving simulated coordination with radar systems, air defence systems, and other units, including as part of NATO-compatible training.

OBRIY + SITL: From flight simulation to real-world control logic

The key feature of OBRIY + SITL is the ability to use real autopilot software to control a virtual UAV. This means that the aircraft's behaviour within the simulator is determined not only by the platform's internal control logic but also by the software algorithms used in real-world unmanned aircraft systems.

In the standard version of the simulator, the UAV's responses to operator commands are calculated by an internal control model. In the SITL configuration, external flight controller firmware is integrated into this process.

OBRIY simulates the virtual environment, flight dynamics, and onboard sensors, including the gyroscope, accelerometer, barometer, compass, and GPS receiver. The corresponding data is transmitted to the firmware, which processes it using its own algorithms, calculates control commands, and sends them back to the simulator.

Based on these commands, OBRIY updates the position and behaviour of the virtual UAV, establishing a continuous feedback loop between the simulation environment and the flight controller software.

This approach enables developers to replicate real-world control logic as closely as possible and validate software performance under controlled conditions.

The configuration is currently optimised for the ArduPilot ecosystem, including ArduCopter for multirotor platforms and ArduPlane for fixed-wing UAVs. Support for additional autopilot systems, including PX4, is planned for future development.

In addition to SITL, OBRIY supports HITL (Hardware-in-the-Loop), enabling a physical flight controller to be connected to the simulation. The controller receives data from simulated sensors and uses it to control the virtual UAV model. This allows developers to test firmware, configurations, and the performance of connected hardware under simulated flight conditions, without risking the loss of a physical aircraft.

‍

Real Ground Control Station – Virtual UAV

One of the key capabilities of OBRIY + SITL is the ability to connect a ground control station (GCS) directly to the simulator instead of a physical UAV.

During a real flight, the ground control station communicates with the physical UAV through the relevant communication equipment. In the SITL configuration, rather than connecting to an actual aircraft, the station connects to OBRIY's virtual environment, running on a computer or server infrastructure.

The ground control station retains its familiar interface and operating logic, transmitting commands to the virtual UAV and receiving telemetry data and a video feed, depending on the implemented integration. This enables engineers and operators to practise controlling the UAV under conditions that closely replicate real-world flight, without using a physical aircraft.

OBRIY can be integrated with manufacturers' own ground control stations, including through software such as Mission Planner and QGroundControl.

This provides several practical benefits for UAV manufacturers:

  • Engineers can test the ground control station's functionality, verify interactions between its software and the autopilot, and validate data exchange.
  • Test pilots can assess the aircraft's handling characteristics and practise different flight modes before conducting actual flight tests.
  • Manufacturers can incorporate this configuration into their own training centres, enabling operators to train using the standard ground control station for a specific UAV platform. They can familiarise themselves with its interface, functions, and control characteristics without having to fly a physical aircraft.

As a result, the same ground control station can be used for engineering testing and operator training in the simulator, as well as for subsequent control of a physical UAV.

From Engineering Testing to Operator Training

Integrating their own UAVs into OBRIY allows manufacturers to move part of their engineering testing and operator training into a virtual environment. With SITL, developers can test software and control systems, identify potential issues, and refine their solutions before conducting real-world flight tests. At the same time, engineers, test pilots, and future operators can practise controlling a specific UAV platform without risking damage to the physical aircraft.

This approach helps reduce the risk of UAV loss during testing, lower development and training costs, and make more efficient use of resources allocated to real-world flight operations.

‍

‍

SITL
Operator training
UAV Testing